SEKURE 1686V Guía de usuario descargar pdf (Pagina 16)

12 User’s Guide

Table 1: User Code Sections

How do I program access codes?

1) Press [

ENTER].

2) Enter your [MASTER CODE].

[ENTER] button flashes.

3) Enter 3-digit [SECTION] (see Table 1 on page 12).

The [NUMBER] corresponding to the first digit of the existing

code (if programmed) and the [

ENTER] button will illuminate

(see Appendix A

on page 35).

4) Enter a new 4 or 6-digit [ACCESS CODE].

[ENTER] button flashes. Return to step 3 to enter next code or

press [

CLEAR] to exit.

How do I delete access codes?

1) Repeat steps 1 to 3 (see above).

2) Press the [FORCE] button once for each digit in the

access code (4 or 6 times) until the keypad emits a

confirmation beep then press the [CLEAR] button to

exit.

Do not delete the System Master Code. Refer to the warning

in section 3.1 on page 10 for more information.

Section User Codes

[001] User Code 001 = System Master Code

[002] User Code 002 = Master Code 1

[003] User Code 003 = Master Code 2

[004] to [047] User Code 004 to User Code 047

[048] User Code 048 or Duress Code

1686_EU08.fm Page 12 Wednesday, September 29, 2004 2:29 PM

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 43 44

Sin comentarios

SEKURE 1686V Guía de usuario Pagina 16