SEKURE Paradox Digiplex DGP-610 Manual de usuario descargar pdf (Pagina 38)

Digiplex LED Keypads 39

7.2 P

ROGRAMMING

HIME

ONES

You can program the keypads to emit a rapid, intermittent beep whenever

designated zones are opened or only when opened between certain

hours. These zones are referred to as Chime Zones. Each keypad must be

Chime programmed separately. Your installer can program your Chimed

zones to also beep upon closure.

7.2.1 Activating a Chime Zone

How do I program a keypad to beep every time a zone opens?

1) Enter your

[

ACCESS

CODE

]

The keypad will emit a Confirmation Beep. The

[

ACCESS

]

Symbol will flash.

2) Press the button to enter the Chiming Menu.

The keypad will emit a Confirmation Beep. The

[

PRG

]

Symbol and Area

Symbol(s) will flash.

3) Press the button.

The keypad will emit a Confirmation Beep. The

[

PRG

]

Symbol and any

already Chimed zones will illuminate.

4) Enter the two-digit zone number(s) you want to designate as Chimed.

The keypad will emit a Confirmation Beep and the Numerical Symbol(s)

corresponding to the zone(s) will illuminate. If you re-enter the number of

an illuminated Numerical Symbol, the corresponding zone will unchime

and the Numerical Symbol will extinguish.

5) Press the button to exit.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 56 57

Sin comentarios

SEKURE Paradox Digiplex DGP-610 Manual de usuario Pagina 38