SEKURE DGP2-648 Manual de usuario descargar pdf (Pagina 32)

30 User’s Manual

for two seconds, the system will generate an alarm. The alarm can

be programmed to be either silent or audible according to your

preference.

9.3 PROGRAMMING CHIME ZONES

You can program your keypad to emit a rapid, intermittent beep

whenever designated zones are opened or only when opened between

certain hours. These zones are referred to as Chime Zones. If you have

several keypads, they must each be programmed separately. Your

installer can program your chimed zones to also beep upon closure.

9.3.1 ACTIVATING A CHIME ZONE

How do I program my keypad to beep every time a zone

opens?

1) Enter your [Access Code]. Your keypad will emit a Confirmation

Beep. The A

CCESS action light will flash.

2) Press the [9] key to enter the Chiming Menu. Your keypad will

emit a Confirmation Beep. The P

RG action light and area light(s)

will flash.

3) Press the [1] key. Your keypad will emit a Confirmation Beep.

The P

RG action light and any already chimed zones will

illuminate.

4) Enter the two-digit zone number(s) you want to designate as

chimed.

Your keypad will emit a Confirmation Beep and the

numerical light(s) corresponding to the zone(s) will illuminate. If you

reenter the number of an illuminated numerical light, the

corresponding zone will unchime and the numerical light will turn off.

5) Press the [CLEAR] key to exit.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 43 44

Sin comentarios

SEKURE DGP2-648 Manual de usuario Pagina 32