SEKURE Paradox Esprit 616LED Especificaciones descargar pdf (Pagina 15)

KEY ACCESS PROGRAMMING

Several control panel features can be programmed

quickly on the keypad, without entering any

programming addresses or section numbers.

Select “one-key access” programming mode by

pressing [ENTER], followed by master or user code 1.

Then press the single key (listed below)

corresponding to the feature you wish to activate.

(Verify first with your installer that all of the features

listed below have been programmed and activated on

your control panel. Press [

ENTER] or [CLEAR] to exit.

key

[9] "Auto arming" time program

Key [9] flashes.



Enter two digits (00 to 23)

for hours + 2 digits (00 to 59) for minutes.

(Press [

ENTER].)



[MEM] "Panel time"

Key [

MEM] flashes.



Enter two digits (00 to 23)

for hours + 2 digits (00 to 59) for minutes.

(Press [

ENTER].)



[BYP] Test report

If programmed by your installer, this sends a

test report code to the monitoring station.



Control panel software versions 2.00 and beyond.



Control panel software versions prior to 2.00.

[TRBL] Call Espload via telephone

If programmed by your installer, this initiates

communication to the central monitoring

station computer using Espload software.

[AWAY] Answer Espload

This feature initiates “modem” communication

between your panel and a computer running

Espload software. (The ADP-1 adapter can

also be used.)

[STAY

] Cancel communication attempts

Stops calls from/to Espload.

When communicating with Espload, it is impossible

to enter programming mode.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Comentarios a estos manuales

Sin comentarios

SEKURE Paradox Esprit 616LED Especificaciones Pagina 15

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad SEKURE Paradox Esprit 616LED