SEKURE ITI UltraGard Manual de usuario descargar pdf (Pagina 5)

Seven indicator lights on the front panel keep the user aware of the status of each function.

Five types of faults are indicated by a repeating pattern of a blinking light on the affected zone:

1 - CO Detector generated fault/warning - pause -

2 - Broken or disconnected CO Detector power - - pause - -

3 - CO Detector line broken or disconnected - - - pause - - -

4 - Shorted CO Detector line - - - - pause - - - -

5 - Shorted CO Detector power - - - - - pause - - - - -

All features are only available when the UltraGuard 12V is connected to a UL listed fire and/or burglar alarm panel

with auxiliary signaling zones which can be designated for CO Detector use only. When the UltraGuard 12V is used

in a residential application, the alarm panel shall be UL listed for household use (UL Standard 1023, Household

Burglar Alarm or UL985, Household Fire Alarm) and when it is used in a commercial application, the alarm panel

shall be UL listed for Commercial Fire Alarm use (UL864) or any of the following UL commercial burglar alarm

categories: UL365, UL609 or UL1610.

WARNING: The UltraGuard 12V Monitor is not a CO Detector. See chapters related to CO Detectors in this manual.

1 2 3 4 5 6 7 8 9 10 ... 27 28

Sin comentarios

SEKURE ITI UltraGard Manual de usuario Pagina 5