SEKURE Paradox Spectra 1686H Manual de instalación Pagina 17
- Pagina / 60
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
SPECTRA SERIES 15
4.4.3 BYPASS PROGRAMMING
Sections [302] to [348]: User Codes 002 to 048
Option [3] OFF = Bypass Programming Disabled
Option
[3]
ON = Bypass Programming Enabled (default)
User codes with this option enabled can perform Bypass Programming in assigned partitions.
4.4.4 STAY ARMING
Sections [302] to [348]: User Codes 002 to 048
Option [4] OFF = Stay Arming Disabled
Option
[4]
ON = Stay Armi ng Enabled for selected U ser Code (default)
User codes with this option enabled can Stay Arm assigned partitions.
4.4.5 FORCE ARM IN G
Sections [302] to [348]: User Codes 002 to 048
Option [5] OFF = Force Arming Disabled (default)
Option [5] ON = Force Arming Enabled for selected User C ode
User codes with this option enabled can Force Arm assigned partitions.
4.4.6 ARM ONLY
Sections [302] to [348]: User Codes 002 to 048
Option [6] OFF = Arm Only Disabled (default)
Option [6] ON = Arm Only Enabled for selected User Code
The user code with this option enabled can arm assigned partitions, but cannot disarm any partitions. The
type of arming is dependent on the other User Code Opti ons selected. Please note that with the Arm Only
option, the user can cancel a recently armed system by re-entering the access code before the end of the
Exi t Delay.
4.4.7 PGM ACT IVAT ION
Sections [302] to [348]: User Codes 002 to 048
Option
[7]
OFF = User Code follows User Code Opti ons and can activate a PGM (default)
Option [7] ON = User Code can activate a PGM only
With option [7] off, entering the access code will arm or disarm according to the programmed U ser Code
Options as well as activate or deactivate a PGM . The appr opriate PGM Activation/Deactivation Event must
also be programmed (see page 37). With option [7] on, the control panel will ignore all other User Code
Options. Therefore, entering the access code will only activate or deactivate the PGM.
4.5 LOCK MASTER CODE
Section [127 ]: System Options
Option [4] OFF = Lock System Master Code Disabled (default)
Option [4] ON = Lock System Master Code Enabled
With this feature enabled, the control panel will lock the System Master Code (001). This means that the System
Master Code cannot be deleted, but it can be changed.
4.6 DURESS CODE
Section [1 27 ] = System Options
Option [6] OFF = Duress Code Disabled (default)
Option [6] ON = User Code 048 becomes a Duress code
With this feature enabled, User Code 048 becomes a Duress Code. When forced to arm or disarm their system,
users can enter a Duress Code (User Code 048) to arm or disarm the system which can immediately transmit a
silent alert to the Central Station, transmitting the duress report code programmed in section [196].
- SPECTRA CONTROL PANELS V2.1 1
- TABLE OF CONTENTS 3
- LIST OF TABLES 4
- PART 1: INTRODUCTION 5
- PART 2: INSTALLATION 6
- 2.2 EARTH GROUND 7
- 2.3 AC POWER 8
- 2.4 BACKUP BATTERY 8
- 2.6 TELEPHONE LINE CONNECTION 8
- 2.7 BELL OUTPUT CONNECTION 9
- 2.9 SINGLE ZONE INPUTS 10
- 2.12 KEYSWITCH CONNECTIONS 11
- PART 3: PROGRAMMING METHODS 12
- SPECTRA SERIES 11 13
- PART 4: ACCESS CODES 15
- 4.1 ACCESS CODE LENGTH 16
- 4.4 USER CODE OPTIONS 16
- 4.6 DURESS CODE 17
- 4.5 LOCK MASTER CODE 17
- PART 5: ZONE PROGRAMMING 18
- 5.4 ZONE PROGRAMMING 19
- 5.5 ZONE DEFINITIONS 20
- 5.7 ZONE PARTITION ASSIGNMENT 22
- 5.8 ZONE OPTIONS 22
- 5.9 ZONE SPEED 24
- 5.10 EOL ZONES 24
- 6.1 SWITCH TO STAY AR MING 25
- 6.2 STAY ARMING WITH DELAY 25
- 6.6.1 AUT O-ARM TIMER 26
- 6.8 AUTO-ARMING OPTIONS 27
- 6.9 ONE-TOUCH ARMING 27
- 6.10 EXIT DELAY 27
- PART 7: ALARM OPTIONS 28
- 7.3 TAMPER RECOGNITION 29
- 7.4 KEYPAD PANIC OPTIONS 29
- 7.5 PANIC LOCKOUT TIMER 30
- SPECTRA SERIES 29 31
- 8.2 REPORT CODES 32
- Sections [208] to [210] 34
- Sections [211] to [213] 34
- 8.4 PARTITION ACCOUNT NUMBERS 35
- 8.5 REPORTING FORMATS 35
- 8.6 PAGER DELAY 36
- 8.7 EVENT CALL DIRECTION 36
- SPECTRA SERIES 35 37
- PART 9: PROGRAMMABLE OUTPUTS 39
- PART 10: SYSTEM SETTINGS 41
- 10.6 SYSTEM REAL-TIME CLOCK 42
- 10.7 CLOCK ADJUST 42
- SPECTRA SERIES 43 45
- 11.1 PANEL ANSWER OPTIONS 46
- 11.2 PANEL IDENTIFIER 46
- 11.3 PC PASSWORD 46
- 11.4 PC TELEPHONE NUMBER 46
- 11.5 CALL WINLOAD SOFTWARE 47
- 11.6 ANSWER WINLOAD SOFTWARE 47
- 11.8 CALL BACK WINLOAD 47
- PAR T 12: USER OPERATION 48
- 12.2 PROGRAMMING ACCESS CODES 49
- 12.4 REGULAR ARMING 50
- 12.5 STAY ARMING 50
- 12.6 INSTANT ARMING 50
- 12.7 FORCE ARMING 51
- 12.9 ONE-TOUCH ARMING 51
- 10-ZONE LED KEYPAD: 52
- 12.15 KEYPAD MUTING 53
- FCC WARNINGS 54
- SPECTRA SERIES 53 55
- SPECTRA SERIES 55 57
- IN CANADA 02/2003 17X8-EI07 60
© 2020, manymanuals.es. Todos los derechos reservados | 0.035 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales