
50 REFERENCE & INSTALLATION MANUAL
NOTE 1:
NOTE 2: This TLM trouble event can only be used with the DigiplexNE control panel models that have two dialers.
NOTE 3: This TLM trouble can only be used with DigiplexNE control panel models that have one dialer.
NOTE 4: This event cannot be used for a module’s PGM programming.
*: If a Keyswitch Input is used, the input must be defined as “Generates a Utility Key Event on Open” or “Generates a Utility Key Event on Open
and Close”. If a remote control is used, the remote control button must be defined as a Utility Key button.
067 Special Status (cont’d) N/A
Trouble in Dialer 097 097
Trouble in Module 098 098
Trouble in Combus 099 099
Future Use 100 to 102 100 to 102
Time and Date Trouble 103 103
AC Failure 104 104
Battery Failure 105 105
Auxiliary Current Limit 106 106
Bell Current Limit 107 107
Bell Absent 108 108
ROM error 109 109
RAM error 110 110
Future Use 111 111
TLM 1 Trouble 112 112
Fail to Communicate 1 113 113
Fail to Communicate 2 114 114
Fail to Communicate 3 115 115
Fail to Communicate 4 116 116
Fail to Communicate with PC 117 117
Future Use 118 118
Future Use 119 119
Module Tamper Trouble 120 120
Module ROM error 121 121
Module TLM error 122 122
Module Failure to Communicate 123 123
Module Printer Trouble 124 124
Module AC Failure 125 125
Module Battery Trouble 126 126
Module Auxiliary Failure 127 127
Missing Keypad 128 128
Missing Module 129 129
Future Use 130 to 132 130 to 132
Global Combus Failure 133 133
Combus Overload 134 134
Combus Fail to Communicate 135 135
070 Clock N/A Hour Minutes
Event Group Event Feature Group Feature Start # End #
000 = Occurs in all partitions enabled in the system (see section [3031]).
001 = Partition 1 003 = Partition 3 005 = Partition 5 007 = Partition 7
002 = Partition 2 004 = Partition 4 006 = Partition 6 008 = Partition 8
255 = Occurs in at least one partition enabled in the system.
Comentarios a estos manuales