SEKURE SX-3100LCD Manual del operador descargar pdf (Pagina 194)

182 OBD

51.0 VGRS (VARIABLE GEAR RATIO

STEERING)

The M-OBD VGRS system provides enhanced diagnostic functions and procedures. The

M-OBD VGRS system is diagnosed using the Tester connected to DLC3. Please verify the

correct vehicle connection. For Operating Procedures for the Data List and DTC Info,

please refer to Section 4.0: M-OBD Functions.

ACTIVE KEYS

u d Change to next/previous menu item.

1, 2, 5 - 8 Select menu item.

e Select highlighted menu item.

X Return to previous menu.

STEERING ANGLE ADJUST

Press 5 to select <STEER ANGLE ADJ> from the <DIAGNOSTIC MENU>. The

STEER ANGLE ADJUST function is used to adjust the steering angle and to register the

neutral point of actuate angle to the ECU. Refer to the service manual before performing

this function.

RECORDS CLEARANCE

Press 6 to select <RECORDS CLEAR> from the <DIAGNOSTIC MENU>. The

RECORDS CLEAR function is used to reset fault records back to UNREC. Refer to the

service manual before performing this function.

SIGNAL CHECK

Press 7 to select <SIGNAL CHECK> from the <DIAGNOSTIC MENU>. The SIGNAL

CHECK function allows the technician to perform certain VGRS diagnostic procedures

without making terminal-to-terminal connections on the data link connector. Refer to the

service manual before performing this function.

COUNTER CLEAR

Press 8 to select <COUNTER CLEAR> from the <DIAGNOSTIC MENU>. The

COUNTER CLEAR function is used to clear DTC C1555 and reset the internal ECU

counter. During this procedure, all codes stored in the ECU are also erased. Refer to the

service manual before performing this function.

1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 377 378

Sin comentarios

SEKURE SX-3100LCD Manual del operador Pagina 194